 |
Indented Hex Washer Head Self Drillers
14-14 x 7/8"
5/16" & 3/8" Across Flats -
Stitch Point - #2 self drill
|
 |
Indented Hex Washer Head Machine Bolts - Plain & Serrated Heads
1/4 - 5/16 - 3/8" - 1/2" dia. up to 3"
|
 |
Indented Hex Washer Head Serrated Self Drillers
14-20 x 5/8" to 1"
3/8" & 7/16" Across Flats -
#3 self drill
|
 |
Indented Hex Washer Head Serrated
14-10 x 3/4", 1", 1-1/4", 1-1/2" Type A
1/4-14 x 3/4" Type AB
Both 3/8" or 7/16" Across Flats
14-8 x 1" Low Root
|
 |
Pan Socket Type A - AB Tapping Screws
6 x 5/8", 8 x 3/4", & 10 x 3/4"
|
 |
Indented Hex Washer Head (Lag Screw) Type A
(5/16) 18-9 x 1-5/8", 2-1/2"
7/16" or 1/2" Across Flats
14-10 x 1-1/2" - 3/8" Across Flats
|
 |
Pan Head Quadrex Self Drillers
8-18 x 1/2" #2 self drill &
10/16 x 3/4" #3 self drill
|
 |
Special Hex Washer Head tapping screw Type A
20-9 x 2"
7/16" Across Flats
|
 |
Carriage Bolts
1/4-20 x 1/2", 5/8", 3/4", 1"
5/16-18 x 3/4", 1", 1-1/2", 2"
|
 |
Knurled Track Bolts
1/4-20 x 3/4" Flat Head
5/16-18 x 3/4" Pan Head Phillips
1/4-20 x 5/8", 3/4" Truss Head
|
 |
Flat Head Carriage Bolts
14-20 x 1-7/8", 2", 2-1/4", 2-1/2"
& 5/16-18 x 3/4"
|
 |
Flat Head, Round Head & Shoulder Rivets
1/4", 5/16", 3/8" Diameter
|
 |
Short Neck Carriage Bolts
1/4-20 x 1/2", 5/8",
5/16-18 x 3/4", 1"
3/8-16 x 7/8"
|
 |
UNC Finished Hex Nuts
1/4", 5/16", 3/8"
|
 |
Special Low Profile Carriage Bolts
5/16-18 x 3/4",
3/8-16 x 1"
|
 |
Serrated Flange Locking Nuts
1/4", 5/16", 3/8"
|
 |
Hex Head Cap Screws
1/4" - 5/16" - 3/8" to 3" long
|
 |
Flat Washers - Lock Washers
1/4", 5/16", 3/8"
|
NOTE: USING SERRATED HEXWASHER SCREWS & NUTS ELIMINATES THE NEED FOR FLAT & LOCK WASHERS
|
 |
All product is JS500 plated
Withstands 500 Hours Salt Spray test and 5 cycles in the SO2 Kesternich test
|
For Technical Data on Garage Door Products please refer to information for specific fastener product elsewhere on this website.
|
