NUTS & WASHERS
NUTS & WASHERS
STANDARD NUTS & WASHERS AVAILABLE IN TYPES & SIZES INDICATED
SQUIRTER® DTI WASHERS
DIRECT TENSION INDICATORS
NOW YOU CAN SEE ORANGE WHEN PROPERLY TENSIONED
- Made to ASTM F959 for use with A325 and A490 bolts
- Provides high consistent bolt tension in heavy hex structural bolts
SEALING WASHERS
METAL BACKING MATERIAL & FACING MATERIAL DESCRIPTIONS
Leland Industries assembled fastener products are produced utilizing the highest quality sealing washers.
FLOW CONE WASHERS,
US Patent #4292876
Flow cone washers are assembled primarily on the Master Gripper family of fasteners.
Vulcanized Grey or Black EPDM to special dished dome galvanized washers.
Vulcanized Grey or Black EPDM flows up into the cone shaped washer to seal around screw threads, fastener shank and under head providing a complete seal.
MASTER SEAL WASHERS
Master Seal Washers are assembled to a wide range of Leland fasteners.
The most common Master Seal Washer is produced with a Galvanized metal washer vulcanized to an EPDM sealing washer.
EPDM ( Ethylene Propylene Diene Monomer ) provides most economical, high quality sealing material. Ozone and weather resistant elastomer with superior aging characteristics.
Heat resistant to 350°F.
ALTERNATE BACKING MATERIALS
ALUMINUM
Provides special alloys that provide similiar longevity to galvanized when low stress or desired deflection requirements exist.
Aluminum minimizes concerns with galvanic corrosion in certain applications.
STAINLESS STEEL (300 SERIES 18/8)
Combines optimum corrosion resistance and economy in a premium quality washer. Used wherever stainless steel fasteners are required or when corrosive environments compromise lesser metals.
ALTERNATE FACING MATERIALS AVAILABLE
NEOPRENE
Versatile general duty facing material for sealing and cushioning washers.
Highly resistant to petro chemicals and certain other chemical families.
SILICONE
High performance – economical, working temperature extremes from -115°F to +480°F.
Highly resistant to chemical environments and repeated sterilization.
MASTER SEAL BONDED WASHER DIAMETER & FASTENER DIAMETER CHART
GIRT SAFETY SPACER NUT
RECOMMENDED FASTENER TO MEET
OSHA 1926.758 SYSTEMS - Engineered Metal Buildings
In GIRT and EAVE STRUT-TO FRAME connections, when girts or eave struts share common connection holes, at least one bolt with its wrench-tight nut shall remain connected to the first member unless manufacturer-supplied, field-attached seat or similar connection device is present to secure the first member so that the girt or eave strut is always secured against displacement.
