FIN NECK LOCKING BOLTS
Fin Neck bolts lock into steel or wood surfaces to assist one man bolt tightening
- Available in either Pan Head or Round Head
- Fin Neck bolts are threaded full length to the base of the fins
Hole size should be 1/8” larger than bolt size to allow fins to lock into structural material and seat properly. Adjustments to hole size may have to be made on site to accommodate hardness of materials being fastened
Fin neck carriage bolt sizes - grades - head type - lengths chart
MASTER HEX SERRATED FLANGE LOCK BOLTS
HEX & FLANGE HEAD SERRATED LOCKING BOLTS
- Serrated washer face ensures locking action when fastener is tightened – separate washers not required
- Serrated Flange Nuts are also available in 1/4” to 5/8” diameters
- Serrated Shelving Lock Bolts ensure locking action when fastener is tightened – lock washers not required
- Hex Nuts serrated both sides are available
Hex serrated flange lock bolt sizes
- grades - lengths chart
TANK BOLTS
NOW WITH JS1000® LONG-LIFE PLATING!!!
- Round head fin neck locking bolts – Lock in to steel surfaces to assist one-man bolt tightening
- Available in carbon steel, GR.8, JS1000® plating
- Also manufactured in stainless steel 304, 316, JS600 plating
- JS600 plating over stainless eliminates galling during assembly
- Spin fit nut tightening on stainless or carbon steel bolts
- Smooth round head design eliminates dust or debris build-up on bolt heads.
Available Bolt Designs Include:
- Standard thread length on 1/2” bolts is 1-1/4” (on bolts 1-1/4” and longer). Other sizes, thread length is 2 times the diameter, plus 1/4”.
- Special thread lengths available.
- Full thread and full body designs available.
- Available in stainless steel 304, 316, JS600 plating, lengths to 4”.
- Undercut head design available.
- Powder coated heads to color match.
- Nylon encapsulated heads, special order.
Rely on North American Quality!
JS1000® is exclusive to Leland. And as with all Leland products. JS1000® is 100% North American.
NEW PRODUCT... “Indented Square Head Chime Bolts”
- GR 8, 1/2” diameter, 1” to 3” lengths.
- Full body and full thread design available.
- JS1000® plating
Always specify Leland’s JS1000® plated fasteners!
Leland also manufactures complete fastener programs for O.E.M, manufacturers, commercial and industrial steel construction, in addition to a full product line for the agricultural building industry.
Hex Flange Head Serrated Locking Bolts and Nuts
- Serrated washer face ensures locking action when fastener is tightened – separate washers not required – spin fit nut tightening
- Serrated Flange Nuts are also available in 1/4” to 5/8” diameters.
- Full Body and Full Thread design available.
A325/A490 STRUCTURAL BOLTS
ASSEMBLED WITH ONE HEX NUT AND ONE WASHER - BOLTS, WASHERS & NUTS ARE ALSO AVAILABLE SEPARATELY
- All A325 Structural Bolts are available assembled or un-assembled, fully threaded bolts are available in most diameters
- Structural bolts are available in Spec. ASTM A-325 Type 1, plain and hot dip galvanized, Type 3 (Weathering) & ASTM A-490
- Hex Structural Nuts and Hardened Round Washers are available separately from 1/2” to 1-1/4”
- Tension indicating washers available
STANDARD NUTS, BOLTS, SCREWS & WASHERS
- Cap Screws 1/4” to 1-1/2” diameter, GR.2-5-8
- Machine screws
- Carriage bolts, full body, full thread design available
- Plow bolts
- Hex nuts, flat and lock washers
- Guard rail and culvert bolts
NUTS & WASHERS
NUTS & WASHERS
STANDARD NUTS & WASHERS AVAILABLE IN TYPES & SIZES INDICATED
MASTER CULVERT & GUARD RAIL FASTENERS
STANDARD MACHINE SCREWS IN DIAMETERS FROM #8 TO 3/8”
- FLAT HEAD SOLID STEEL RIVETS
1/4 X 1/2” – 3/8 X 3/4”, 7/8”, 1” & 1-1/4” – 1/2 X 13/16” - PAN COUNTERSUNK SOLID STEEL RIVETS
5/16 X 5/8” & 3/4” – 3/8 X 3/4”, 7/8” & 1” - FLAT HEAD SHOULDER RIVETS
1/4 X 17/32” – 5/16 X 3/8” & 7/16” - GUARD RAIL SPLICE BOLTS
Available 5/8 x 1-1/4 - All product manufactured in North America
